THE BOX

  "I started DJ Powder Coating in 2011, in a small shop with just myself, one employee, and an office manager. My main goal was quality powder coating. As we all know, curing is a big factor of quality. Just starting out I didn’t have the funds for the extremely expensive monitoring systems on the market, so my father decided to take matters in his own hands. ATMS was born! Over the years he perfected his idea and gave me one of the best tools I have every used!  ATMS (THE BOX) taught me to learn my oven, make sure my product was properly cured, and how to be as efficient as possible. The best part of all was I could learn this while continuing to powder coat parts and watch the process happening in real time.

Today DJ Powder Coating is in a 16,000-sf building with two ovens and 15 employees. In addition, I was recently selected for 40 under 40 in Product Finishing Magazine. I can 100% say that ATMS has contributed vastly in the success of DJ Powder Coating. I highly recommend their product to anyone in the industry no matter how big or small."

Denny Young, Owner, DJ Powder Coating

 

Real Time! No waiting until part is finished to look at results!

  • Advanced Temperature Monitoring Systems “THE BOX” gives you the ability to ensure your powder is cured and to maximize your oven efficiency. Improving oven efficiency may benefit profits.
  • THE BOX is easy to use. Turn on the switch plug in your probes, open your software and your ready to go.
  • THE BOX is easy to maintain. If you get powder on the box it is easy to remove.

 

THE BOX specifications:

  • 8 Channels
  • Accuracy +/- .3oC (+/-.5oF)
  • Cold junction compensation
  • 5 sec to 1 hr sampling times
  • Uses 3 AA batteries
  • At 5 sec sampling intervals battery life is approximately 42 hrs with 2800mAh Ni-MH batteries
  • The internal circuit board’s temperature should be kept below 135°F with 150°F maximum
  • The maximum sustained temperature of THE BOX is 475oF, with short term temperatures of 500oF. Absolute maximum temperature 500oF. 
  • Over 4 hours of run time @ 400oF oven temperature before the electronics reach 135oF
  • Type-K thermocouples (special limits of error ANSI MC96.1 +/- 4% or 1.1oC)
  • Certification - THE BOX is ISO 9002 certified by an independent facility CATLab.
  • Windows  compatible 32 and 64 bit versions of Windows XP, Vista,7,8,10
  • Dimensions 6.5" x 8" x 14.3".  Weight approximately 16.5 lbs
  • Silicon Free Design

Included with each unit:

  • Thermal barrier with 8 channel wireless temperature transmitter
  • Wireless receiver
  • 6 Welded probes (Type-K thermocouple wire that is special limits of error ANSI MC96.1 +/- 4% or 1.1oC)
  • Software, The software manual can be downloaded from the website as well as new software upgrades no charge.
  • Warranty One year, normal wear

 

// ]]>

// ]]>